Filter
Top Products
44
7-2.Scanning an Image into VK-2
VK-2 support 3
rd
party scanners with Twain drivers.
1.Install Image Scanner software.
2.Click Scan application on the desktop to start.
3.Click Setting and select Twain source.
4.Click [SCAN]
Select the resolution and set the mode “Full Color” image.
5.After the image is scanned, the image is shown in the frame window.
6.Click [INPUT DATA] to open input data dialog. Enter Patient ID.
7. Click [SAVE] to save the image. You can now view and edit the image in VK-2.
The green mark from Scanner File is added at the left edge of the image