Lincoln Electric IM10018-A Welding Consumables User Manual


 

'%"(&""'!

%J)%
If all recommended possible areas
of possible cause have been
checked and the problem persists,
<;A.0AF<B?9<0.96;0<9;
BA5<?6G216291&2?C602.0696AF
#%" &
&, #'" &
Major Physical or Electrical
Damage is Evident
The Machine is dead- The Input
contactor does not operate.
#"&&
(&
Contact the Lincoln Electric Service
Dept. (216) 383-2531 or 1-800-
833-9353 (WELD)
1. Check for blown or missing
fuses in input lines.
2. Check the three- phase input
line voltage at the machine.
The input voltage must match
the rating plate and reconnect
panel.
3. Power ON/OFF switch may be
defective.
4. Rectifier bridge may be defec-
tive.
5. VRD P.C. board may be defec-
tive.
%" !
"(%&"'"!
"('#('#%" &
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
<0.96;0<9;BA5<?6G216291&2?C602.0696AF for technical troubleshooting assistance before you proceed.
('"!
"/@2?C2.99&.32AFB61296;2@12A.6921A5?<B45<BAA56@:.;B.9