Filter
Top Products
% &
%J)%
S22980
ELECTRODE CABLE
-
+
14 PIN
AMPHENOL
POWER SOURCE
TO WORK
AND 14-PIN CABLE PLUG, REAR VIEW
AND 14-PIN CABLE PLUG, FRONT VIEW
K=42
I=41
H=21
D=4
C=2
PIN
B
C
D
E
F
75
76
77
4
2
LEAD
42V AC
42V AC
TRIGGER CIRCUIT
(SEE APPROPRIATE WIRING DIAGRAM)
FUNCTION
FUNCTIONS ARE LISTED FOR REFERENCE
ONLY AND EACH MAY OR MAY NOT BE
PRESENT IN YOUR EQUIPMENT.
14-SOCKET BOX RECEPTACLE, FRONT VIEW
14-SOCKET BOX RECEPTACLE, REAR VIEW
N.C. PINS NOT LISTED ARE NOT CONNECTED
ON CABLE.
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT
AND DUTY CYCLE OF APPLICATION.
G
21
H
41
I
42
J
M
F=76
E=77
G=75
N
L
A
B=GND
K=42
I=41
H=21
D=4
C=2
J
M
F=76
E=77
G=75
N
L
A
B=GND
9 PIN
AMPHENOL
K
GND
CHASSIS CONNECTION
WORK
OUTPUT CONTROL
OUTPUT CONTROL
OUTPUT CONTROL
TRIGGER CIRCUIT
Only qualified persons should install, use or
service this machine.
Do not operate with covers removed.
Disconnect power source before
servicing.
Do not touch electrically live parts.
N.D. IF LEAD #21 IS TO BE CONNECTED TO THE
TERMINAL STRIP, CONNECT TO THE #21
TERMINAL THAT MATCHES WORK POLARITY.
THIS CONNECTION MUST BE CHANGED WHENEVER
THE ELECTRODE POLARITY IS CHANGED.
10-30-98F
N.E.
N.E. ILLUSTRATION DOES NOT NECESSARILY REPRESENT
ACTUAL POSITION OF APPROPRIATE OUTPUT STUDS.
MORE INFORMATION.
CONNECTION OF DH-10 OR LN-10 TO THE DC-600 VRD POWER SOURCE WITH 14 PIN AMPHENOL
REFER TO POWER SOURCE OPERATING MANUAL FOR
LINCOLN
WIRE
FEEDER
WIRE FEEDER
INPUT CABLE
ASSEMBLY
N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO
CHANGE POLARITY, TURN POWER "OFF",
REVERSE ELECTRODE AND WORK CABLES AT
POWER SOURCE.
FOR PROPER SETTINGS OF SWITCHES ON POWER SOURCE,
SEE POWER SOURCE OPERATING MANUAL.
S22980
ELECTRODE CABLE
-
+
14 PIN
AMPHENOL
POWER SOURCE
TO WORK
AND 14-PIN CABLE PLUG, REAR VIEW
AND 14-PIN CABLE PLUG, FRONT VIEW
K=42
I=41
H=21
D=4
C=2
PIN
B
C
D
E
F
75
76
77
4
2
LEAD
42V AC
42V AC
TRIGGER CIRCUIT
(SEE APPROPRIATE WIRING DIAGRAM)
FUNCTION
FUNCTIONS ARE LISTED FOR REFERENCE
ONLY AND EACH MAY OR MAY NOT BE
PRESENT IN YOUR EQUIPMENT.
14-SOCKET BOX RECEPTACLE, FRONT VIEW
14-SOCKET BOX RECEPTACLE, REAR VIEW
N.C. PINS NOT LISTED ARE NOT CONNECTED
ON CABLE.
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT
AND DUTY CYCLE OF APPLICATION.
G
21
H
41
I
42
J
M
F=76
E=77
G=75
N
L
A
B=GND
K=42
I=41
H=21
D=4
C=2
J
M
F=76
E=77
G=75
N
L
A
B=GND
9 PIN
AMPHENOL
K
GND
CHASSIS CONNECTION
WORK
OUTPUT CONTROL
OUTPUT CONTROL
OUTPUT CONTROL
TRIGGER CIRCUIT
Only qualified persons should install, use or
service this machine.
Do not operate with covers removed.
Disconnect power source before
servicing.
Do not touch electrically live parts.
N.D. IF LEAD #21 IS TO BE CONNECTED TO THE
TERMINAL STRIP, CONNECT TO THE #21
TERMINAL THAT MATCHES WORK POLARITY.
THIS CONNECTION MUST BE CHANGED WHENEVER
THE ELECTRODE POLARITY IS CHANGED.
10-30-98F
N.E.
N.E. ILLUSTRATION DOES NOT NECESSARILY REPRESENT
ACTUAL POSITION OF APPROPRIATE OUTPUT STUDS.
MORE INFORMATION.
CONNECTION OF DH-10 OR LN-10 TO THE DC-600 VRD POWER SOURCE WITH 14 PIN AMPHENOL
REFER TO POWER SOURCE OPERATING MANUAL FOR
LINCOLN
WIRE
FEEDER
WIRE FEEDER
INPUT CABLE
ASSEMBLY
N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO
CHANGE POLARITY, TURN POWER "OFF",
REVERSE ELECTRODE AND WORK CABLES AT
POWER SOURCE.
FOR PROPER SETTINGS OF SWITCHES ON POWER SOURCE,
SEE POWER SOURCE OPERATING MANUAL.