Filter
Top Products
C-2
ACCESSORIES
C-2
WIRE REEL ASSEMBLY:
K303 - 50-60 lb. (22.7-27.2 kg) Wire reel mounting
stand. Assembly includes a framework to which is
attached the 50-60 lb. (22.7-27.2 kg) wire reel, a
mounting spindle, a dust shield, a lift bail, and a cable
clamp for fastening the input cable assembly. The
reel mounting spindle is the pull knob type with a built-
in brake. The brake pad is adjustable for proper brak-
ing at low or high wire feed speeds. In extremely
dusty and dirty locations a wire reel dust shield door
kit can be added to this unit.
This door kit, which includes a hinged door and sliding
bottom seal, makes the housing completely enclosed.
Order part number M11514.
K376 - Same as K303 above but without dust shield.
A dust shield that covers the wire reel and protects the
wire from falling dirt and dust is available for this unit.
Order part number S14543. This unit will also accept
the M11514 door kit (see K303 above) but only if
already equipped with optional dust shield (S14543).
K377 - Small mounting stand for Readi-Reel coils or
10-30 lb. (4.5-14 kg) spools with 2" (51 mm) I.D. This
assembly includes a small frame to which is attached
a 2" (51 mm) O.D. wire reel spindle and a K363P
Readi Reel adapter for using the Lincoln "Readi-Reel
Electrode Coils". Without the adapter, the unit is
capable of handling spools with a 2" (51 mm) I.D., a
12" (305 mm) maximum O.D., and a 4" (101 mm)
width.
K378 - Small mounting stand for 13-14 lb. (6 kg)
Innershield coils. This assembly includes the same
smaller frame as used in the K377 and a fully
enclosed canister system for de-reeling of the 14 lb. (6
kg) coil. This system has a fixed brake for this coil.
K445 - 50-60 lb. (22.7-27.2 kg) Readi-Reel mounting
stand. This assembly includes framework to which is
attached a 2" (51 mm) O.D. spindle with adjustable
brake and 50-60 lb. (22.7-27.2 kg) (K438) Readi-Reel
adapter. Includes a lift bail and cable clamp for fas-
tening the input cable assembly. Does not include a
dust shield. A dust shield that covers the wire reel
and protects the wire from falling dirt and dust is avail-
able for this unit. Order part number S14543. This
unit will also accept the M11514 door kit (see K303
above) but only if already equipped with optional dust
shield (S14543).
SYNERGIC 7 & 7H
UNIVERSAL WIRE REEL STAND (K1524-1)
Includes a 2" (51mm) O.D. Spindle with adjustable
brake and two locations for mounting the spindle to
allow for the mounting of 50 - 60lb, 10 - 30 lb, 13 -
14lb, and 8" O.D. coils with proper spindle adapters.
(See OPERATION section) Capable of being mount-
ed on the top of a suitable power source or surface
without the need for any other mounting kit. Optional
features available for this stand include:
• K1555-1 insulated lift bale
• K1556-1 caster kit
• K1557-1 swivel platform.
60 LB. (27.2 KG) COIL ADAPTER (K1504-1)
Permits 50-60 lb. (22.7-27.2 Kg) coils to be mounted
to a 2" (51mm) spindle.
K1551-1 INSULATED LIFT BALE: Provides a
bolt on lift bale with an electrically insulated lift hook.
K1556-1 CASTER KIT: Comes with 4 light duty
2" O.D. casters which mount in place of the rubber
feet on the wire stand. Use in light duty applications
where portability is required. Can be used in combi-
nation with the K1557-1 swivel platform.
K1557-1 SWIVEL PLATFORM: Allows for the
mounting of the wire feeder reel stand assembly on
top of a suitable power source if the need for the wire
feeder reel stand assembly to swivel is desired. Also
has mounting holes in the base feet for mounting to
any surface that it can be fastened to. Comes with a
rotating tool tray to hold gun tips, guide tubes, drive
rolls, etc. Will work in combination with the K1556-1
caster kit.