Filter
Top Products
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 27
MQ SP-3035 CONCRETE SAW
Handlebars
The handlebars are adjustable to three different angles, for optimum operator control, and can
also be slid fully inward for storage. Once handlebars are adjusted, lock them into position by
tightening the lock knob on each side.
Using the handlebars in position #2 or #3, when employing larger diameter blades reduces the
need to bend over and the effort required by the operator to maneuver the unit.
Fig. 13 — Handlebar Positions
NOTE
Using the handlebars in position #2 or #3 when employing larger
diameter blades, reduces the need to bend over, and reduces the effort
required by the operator to maneuver the saw.
Three
operating
positions
Storage
position
Lock Knob
P 3
P 2
P 1