Multiquip SP303520 Saw User Manual


 
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 61
MQ SP-3035 CONCRETE SAW
EXPLANATION OF CODE IN
REMARKS COLUMN
The following section explains the different symbols
and remarks used in the Parts section of this manual.
Use the help numbers found on the back page of the
manual if there are any questions.
Sample Parts List:
NO. PART NO. PART NAME QTY. REMARKS
1 12345 BOLT....................... 1..... INCLUDES ITEMS W/
#
2# WASHER, 1/4 IN...... ......NOT SOLD SEPARATELY
2# 12347 WASHER, 3/8 IN......1....MQ-45T ONLY
3 12348 HOSE....................A/R... MAKE LOCALLY
4 12349 BEARING.................1.... S/N 2345B AND ABOVE
NO. Column
Unique Symbols - All items with same unique symbol
($, #,
+, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in
the “Remarks” column.
Duplicate Item Numbers- Duplicate numbers indicate
multiple part numbers are in effect for the same
general item, such as different size saw blade guards
in use or a part that has been updated on newer
versions of the same machine.
PART NO. Column
Numbers Used - Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at time of publication.
A blank entry generally indicates that the item is not
sold separately or is not sold by Multiquip. Other
entries will be clarified in the “Remarks” Column.
QTY. Column
Numbers Used - Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not
sold separately. Other entries will be clarified in the
“Remarks” Column.
REMARKS Column
Some of the most common notes found in the
“Remarks” Column are listed below. Other additional
notes needed to describe the item can also be shown.
Assembly/Kit - All items on the parts list with the
same unique symbol will be included when this item is
purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
Serial Number Break - Used to list an effective serial
number range where a particular part is used.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use - Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” - Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables,
shims, and certain washers and nuts.
“Not Sold Separately” - Indicates that an item cannot
be purchased as a separate item and is either part of
an assembly/kit that can be purchased, or is not
available for sale through Multiquip.
The contents and part numbers listed in the
parts section are subject to change without
notice. Multiquip does not guarantee the
availibilit
y
of the
p
arts listed.

NOTE
When ordering a part that has more
than one item number listed, check
the remarks column for help in
determining the proper part to order