Multiquip SP303520 Saw User Manual


 
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 54
MQ SP-3035 CONCRETE SAW
Control Handle Adjustment
The Control Handle is adjustable to provide the preferred “feel”.
1. Using a ¼” Allen wrench and 9/16” wrench, loosen both pivot bolts until they can be turned
by hand. Pivot #1 requires only a 9/16” wrench, as the Allen nut side is welded in place.
2. Tighten pivot #1 until the handle is close to the desired “feel”.
3. Tighten pivot #2 until it just starts to increase the force required to move the handle.
Fig. 41 — Control Handle Adjustment
Pivot #1
Piv
o
t #2