Filter
Top Products
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 35
MQ SP-3035 CONCRETE SAW
Positraction
Positraction, when ON, locks both drive wheels together for straight-line movement. It is
recommended for all cutting and is especially helpful on uneven surfaces, and when loading and
unloading the saw.
1. Move the Positraction lever to “ON” (positraction engaged) to lock both drive wheels.
2. To unlock the drive wheels for easy maneuverability and turning, move the Positraction lever
to OFF.
NOTE
See the Maintenance Section for instructions on aligning the wheels
to correct pulling to the right or left.
Fig. 21 — The Positraction System
Positraction Bar
Positraction
Engagement
Lever