Multiquip SP303520 Saw User Manual


 
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 36
MQ SP-3035 CONCRETE SAW
Transaxle
The hydrostatic-powered transaxle has no chains, sprockets or gearboxes to service. There is a
simple cable control for forward-reverse motion, and a single drive belt from the engine to power
the transaxle.
Fig. 22 —Transaxle
Night Light
The optional night light can be used on either side of the saw, and can be extended and rotated for
best illumination of the cutting area. Once the light is aimed, lock it in position by tightening the
lock knob. The light can be removed for storage by loosening the lock knob, disconnecting the
light cord plug and sliding the light bar out of the saw.
Fig. 23 — Night Light
Night
Light