Filter
Top Products
7
Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a
Model 1285 Jointer. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed
and constructed to provide years of trouble free operation if used in accordance with instructions set forth
in this manual. If there are any questions or comments, please contact either your local supplier or WMH
Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications
Model Number................................................................................................................................... 1285
Stock Number (3HP, 1Ph, 230V, with standard cutterhead).......................................................... 1791241
Stock Number (3HP, 3Ph, 230V/460V*, with standard cutterhead) ............................................... 1791249
Stock Number (3HP, 1Ph, 230V, with helical cutterhead) ............................................................. 1791307
Stock Number (3HP, 3Ph, 230V/460V*, with helical cutterhead)................................................... 1791308
Cutting Capacity (W x D) (in.).................................................................................................. 11-3/4 x 3/4
Cutterhead Speed (RPM).................................................................................................................. 5,000
Rabbeting Capacity (in.)........................................................................................................................3/4
Table Surface (L x W) (in.)............................................................................................................. 84 x 12
Outfeed Table Height from Floor (in.)...............................................................................................31-5/8
Fence Size (L x W) (in.) ....................................................................................................... 47-1/4 x 5-1/4
Fence Tilt (degrees)......................................................................................................90, 45 right, 45 left
Fence Positive Stops (deg.) ....................................................................................................... 45 and 90
Number of Knives – standard cutterhead .................................................................................................3
Number of Inserts – helical cutterhead ........................................................................ 44, with 2 rabbeting
Size of knives – standard cutterhead (L x W x T) (in.)........................................................ 12 x 13/16 x 1/8
Dust Collection Minimum CFM Required.............................................................................................. 800
Approximate Net Weight (lbs.) ............................................................................................................. 762
Approximate Shipping Weight (lbs.) .....................................................................................................880
*pre-wired 230V
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.