Filter
Top Products
30
Trouble Probable Cause Remedy
Machine will not
start/restart or
repeatedly trips circuit
breaker or blows
fuses.
(continued)
Switch failure.
If the start/stop switch is suspect, you
have two options: Have a qualified
electrician test the switch for function, or
purchase a new start/stop switch and
establish if that was the problem on
change-out.
Band Saw does not
attain full speed.
Extension cord too light or too long.
Replace with adequate size and length
cord.
Low current. Contact a qualified electrician.
15.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-
800-274-6848 Monday through Friday (see our website for business hours, www.powermatic.com). Having the
Model Number and Serial Number of your machine available when you call will allow us to serve you quickly
and accurately.