Support User Manuals

Raritan Computer DPX-OG-E Welding System User Manual

Open as PDF

of 171

Managing the Dominion PX

94

Modifying the Communications, Port and Bandwidth

Settings

YoucanuseTelnetorSSHtologintotheDominionPXʹsCLPinterface.

However,bydefaultSSHisenabledandTelnetisnot(becauseit

communicatesintheclearandisthereforenotsecure).Youcanchange

thisandenableordisableeitherapplication.

Youcanalsosetaba

ndwidthlimit,andchangeanyofthedefaultport

settings.Finally,youcanenableordisabletheRaritanSetupProtocol.

Todoallthis:

1. ChooseDeviceSettings‐‐>Network.TheNetworkSettingswindow

appears.TheMiscellaneousNetworkSettingspanelonthetop

rightcontainsthecommunications,port,andbandwidthsettings.



2. Bydefault,CLP‐TelnetisdisabledandCLP‐SSHisenabled.To

changethis,clickeithercheckbox.

3. TosetanupperlimitontheamountofbandwidthTelnetorSSHwill

beallowedtouse,typethenumberofkilobitspersecondinthe

BandwidthLimitfield.

4. Byde

fault,theHTTP,HTTPS,Telnet,andSSHportsaresettothe

standardportsforthesecommunicationsprotocols.Ifyoupreferto

usedifferentports,youcanchangetheportassignmentshere.

5. ClickthecheckboxlabeledDisableSetupProtocoltodisableit.

previous next