Support User Manuals

Raritan Computer DPX-OG-E Welding System User Manual

Open as PDF

of 171

Setting Up Access Controls

54

2. ClickthecheckboxlabeledEnableGroupbasedSystemAccess

Control.Thisenablesthefeature.

3. ClickApply.Groupbasedaccesscontrolrulesareenabled.

Change the Default Action

ThedefaultactionisshownintheGroupbasedSystemAccessControl

panelontheSecuritySettingswindow.Tochangethedefaultaction:

1. ChooseDeviceSettings‐‐>Security.TheSecuritySettingswindow

appears.ThepanellabeledGroupbasedSystemAccessControl

controlsthisfeature.

2. MakesurethecheckboxlabeledEnableGroupbas

edSystemAccess

Controlischecked.

3. Selecttheactionyouwantfromthedrop‐downlistintheDefault

Actionfield(refertothefigureabove).

4. ClickApply.Thedefaultactionisapplied.

Create Group Based Access Control Rules

Groupbasedaccesscontrolrulesacceptordroptrafficintendedforthe

DominionPX,basedontheuserʹsgroupmembership.Likefirewall

rules,theorderoftheruleisimportant,sincetherulesareexecutedin

numericalorder.

Tocreategroupbasedaccesscontrolrules:

1. ChooseDeviceSettings‐‐>Se

curity. TheSecuritySettingswindow

appears.ThepanellabeledGroupbasedSystemAccessControl

controlsthisfeature.

2. MakesurethecheckboxlabeledEnableGroupbasedSystemAccess

Controlischecked.

3. Createordeletespecificrules.Thefollowingexplainshow:

previous next