Filter
Top Products
11
The Drill Press is shipped complete in one box.
n Remove the packing materials from around your drill
press.
n Separate all loose parts from packing materials and
check each item with illustration and “List of Loose
Parts.”
n Carefully lift the parts out of carton. This is a heavy drill
press. To avoid back injury, get help when needed.
n Do not discard the packing materials until you have
carefully inspected the drill press, identified all loose
parts, and satisfactorily operated your new drill press.
n Remove the protective oil that is applied to the table and
column. Use any ordinary household type grease and
spot remover.
n Apply a coat of paste wax to the table and column to
prevent rust. Wipe all parts thoroughly with a clean dry
cloth.
n Examine all parts to make sure no breakage or damage
has occurred during shipping.
If any parts are damaged or missing, do not attempt to plug
in the power cord and turn the switch on until the damaged
or missing parts are obtained and are installed correctly.
Contact your nearest RIDGID dealer or call 1-866-539-1710
for assistance if any parts are missing or damaged.
WARNING:
If any parts are missing do not operate your drill
press until the missing parts are replaced. Failure
to do so could result in possible serious injury.
UNPACKING