Filter
Top Products
28
ACCESSORIES
Use Only Accessories Designed For This Drill Press To
Reduce the Risk of Serious Injury From Thrown Broken
Parts Or Work Pieces
n When cutting large diameter holes:
Clamp the workpiece firmly to the table. Otherwise the
cutting may grab and spin it at high speed.
Use only one piece, cup-type, hole cutters.
Do not use fly cutters or multi-part hole cutters as they
can come apart or become unbalanced in use.
Keep speed below 1500/min..
n Drum sanders must never be operated on this drill press
at a speed greater than 1800/min..
n Do not install or use any drill that exceeds 7 in. (178
mm) in length or extends 6 in. (152 mm) below the chuck
jaws. They can suddenly bend outward or break.
n Do not use wire wheels, router bits, shaper cutters,
circle (fly) cutters or rotary planers on this drill press.