Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
8
1. Check for and remove debris and burrs in 5104-1-1 (Gun Block).
2. Install the two 5104-3-1 (Secondary Seals) in the 5104-1-1 (Gun
Block). See Fig. 3.1
3. Install the 5104-10-1 (Center Spacer) into the center area of the
5104-1-1 (Gun Block).
4. Insert the 9301-5-1 (Seal Installation Tool) through the side of the
gun block to align the 5104-10-1 (Center Spacer) with the
5104-3-1 (Secondary Seals).
5. Install the catalyst seal components onto the 9301-5-1 (Seal
Installation Tool) in the following order; 5104-7-1 (Packing Ring),
5104-6-1 (Teflon Catalyst Seal), and the 5104-4-1 (Relief Spacer).
See Fig. 3.2.
6. Insert the Seal Installation Tool with the catalyst seal components
into the catalyst port of the 5104-1-1 (Gun Block) See Fig. 3.2.
Gun Block Assembly
Fig. 3.1
Fig. 3.2