Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
7. Slide Rubber Roll Assembly toward the 5103-03-01 (Wedge Rotor
Assembly) and tighten the 7102-2-20 (Socket Head Cap Screw)
Rubber Roll Adjustment
1. Slightly loosen the 7102-2-20 (Socket Head Cap Screw), just
enough so the Rubber Roll Assembly will slide in the T-Slot. See
Fig. 4.6.
2. Apply slight pressure of the Rubber Roll Assembly to the
5103-03-01 (Wedge Rotor Assembly), and tighten the 7102-2-20
(Socket Head Cap Screw).
NOTE
When making this adjustment, Rubber Roll must not be in contact with
Chopper Blade.
Fig. 4.6
17