Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
14. Press firmly, or tap with a hammer until the seal assembly bottoms
out in the 5104-1-1 (Gun Block), then gently remove the Seal
Alignment Tool.
15. Hold the 9301-4-2 (Resin Seal Alignment Tool) firmly with a pair of
pliers.
16. Insert the tapered end of the 9301-4-2 (Resin Seal Alignment
Tool), into the 5104-1-1 (Gun Block) through the resin fitting port
on the back of the Gun Block.
17. Gently press and move the Seal Alignment Tool around until the
holes in the 5104-5-1 (Teflon Resin Seal) align with the resin port
in the 5104-1-1 (Gun Block). See Fig. 3.5
Fig. 3.4
Fig. 3.5
10