Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
19
Chapter
5
SUPER PRO GUN
Actuator Disassembly 5106-01-01
1. Unscrew the two 5105-13-1 (Rear Screws), and the two 5105-12-1
(Front Screws) to remove the 5106-00-01 (Cylinder Body
Assembly) from the 5105-00-01 (Gun Handle Assembly).
2. Remove the two 5106-4-1 (Cylinder Caps) from the 5106-1-1
(Cylinder Body). Remove and discard the two 7301-3-020
(O-Rings) from the 5106-4-1 (Cylinder Caps).
3. Push the 5106-7-1 (Actuator Piston) out of the back of the
5106-1-1 (Cylinder Body). Remove and discard the 7301-3-020
(O-Ring) from the Actuator Piston.
NOTE
Discard all parts to be replaced by repair kit. All remaining parts should be
thoroughly cleaned, inspected for damage, and replaced if necessary.
See Figs. 9.1 & 9.2 for exploded schematic drawings