Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
Chapter
8
SUPER PRO GUN
SuperCutter Disassembly
5103-00-01
1. Unscrew the 5103-14-1 (Cover Nut) and remove the 5103-13-1
(Chopper Cover) from the 5103-00-01 (Roving Cutter Basic
Assembly).
The remainder of the disassembly covered in this manual pertains to
the rubber roll and the rotor.
Rubber Roll Disassembly
2. To remove the Rubber Roll Assembly, loosen the 7102-2-20
(Socket Cap Screw) enough to slide the 5103-4-1 (Slide Adjust
Nut) from the slot in the 5301-1-1 (Base Plate)
3. With a screw Driver, remove the 7205-3-31 (E-Ring), and slide the
5103-6-1 (Rubber Roll) off the 5403-5-01 (Mandrel Assembly).
See Figs. 9.13 - 9.20 for exploded schematic drawings
24