Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
NOTE
Proper adjustment has Idler Assembly touching the Rubber Roll, but still able
to rotate with minimum effort.
Fig. 4.7
Idler Adjustment
1. Slightly loosen the 7102-2-20 (Socket Head Cap Screw), just
enough so the Idler Assembly will slide in the T-Slot. See Fig. 4.7.
2. Slide the 5103-7-01 (Sleeve w/ Bearing) until it just makes contact
with the 5106-6-1 (Rubber Roll).
18