Filter
Top Products
SUPER PRO GUN &
SUPER PRO GUN II
NOTE
The Piston should be inserted “bushing end first”, with the bushing on the top
side of center.
5. Install the two 5106-4-1 (Cylinder Caps).
6. Place the 5106-2-1 (Actuator Seal) over the 5106-1-01 (Cylinder Body)
so the Mounting screw holes line up.
7. Place the 5104-00-01 (Gun Block Assembly) onto the 5106-2-1 (Actuator
Seal.
8. Secure the 5104-00-01 (Gun Block Assembly) onto the 5106-01-01 (Gun
Actuator) with the four 5106-6-1 (Mounting Screws) and the 5106-3-1
(Mounting Seals).
NOTE
The 5104-11-1 (Actuating Stem) must be inserted into the 5106-5-1
(Bushing) located in the 5106-7-1 (Actuating Piston).
2