Filter
Top Products
Hardware setup
12 S1A53844 01/2011
Pin out of the Open Style Modbus connector
Open Style Connector (screwcage plug style)
B +
A –
GND Common
SCR Shield
Note: It is possible to connect two wires
inside one cage in order to be compliant to
daisy chain requirements.
Cross section:
0.2 - 2.5 mm² / AWG 24-12
Tightening torque:
0.5-0.6 Nm / 4.4-5.3 lb/In.
VIA U
VIB U
I
PTC
SW100
Sink
PLC FM
Source
SW102
IU
SW101
Term
SW103
FLA
FR
RES PLC P24
BAGNDSCR
PP CCVIA VIB
CC FM
FLB FLC RYA RYC
Open Style Connector
RJ45
Diagnostic DELs
Line termination switch
DANGER
UNINTENDED EQUIPMENT OPERATION
• Modify only the setting of the switches when the product is switched off.
• Do not change the setting of the SW102 unless your system is wired for SINK logic.
Failure to follow these instructions will result in death or serious injury.
CAUTION
RISK OF BODY INJURY
Use a screwdriver to change the position of the switches.
Failure to follow these instructions will result in death or serious injury.