Filter
Top Products
Parameter list
46 S1A53844 01/2011
List of monitoring parameters
General
Monitoring parameters are read only.
Status
Frequency and speed
Current and torque
Voltage
Parameter
description
Modbus
address
Status word (Fd01) 64769 16#FD01
Status word 2 (Fd42) 64834 16#FD42
Status word 3 (Fd49) 64841 16#FD49
Status word at last trip (FE01) 65025 16#FE01
Status word 2 at last trip (FE42) 65090 16#FE42
Status word 3 at last trip (FE49) 65097 16#FE49
Command mode status (FE45) 65093 16#FE45
Setpoint mode status (FE46) 65094 16#FE46
Parameter Modbus
address
Unit Description
Output frequency (Fd00) 64768 16#FD00 Hz Current value
Output frequency at last trip (FEOO) 65024 16#FE00 Hz Value before trip
Output speed (FE90) 65168 16#FE90 rpm -
Estimated speed (FE16) 65046 16#FE16 Hz Value before trip
Frequency reference before ramp
(FE02)
65026 16#FE02 Hz Value before trip (before PI and speed ramp)
Frequency reference after ramp (FE15) 65045 16#FE15 Hz Value before trip (after PI and speed ramp)
PID feedback value (FE22) 65058 16#FE22 Hz Value before trip
Parameter Modbus
address
Unit Description
Output current (
FE03)
65027 16#FE03 % -
Torque (
FE18)
65048 16#FE18 % -
Torque current (
FE20)
65056 16#FE20 % Value before trip
Exciting current (
FE21)
65057 16#FE21 % Value before trip
Parameter Modbus
address
Unit Description
Output voltage (
FE05)
65027 16#FE05 % Value before trip
Voltage at DC bus (
FE04)
65048 16#FE04 % -