Filter
Top Products
16
MDS-NT1
3-5. FRONT PANEL SECTION
3-6. BD BOARD, OVER WRITE HEAD (HR901)
6
2
screw (P1.7
×
6)
3
over write head (HR901)
Note: By means of removing
1
connector (CN104),
BD board can be removed without removing
the over write head (HR901).
Note: The over write head (HR901) should be
handled with care as it is damaged easily.
4
Remove four solders.
4
Remove five solders.
8
BD board
1
connector
(CN104)
7
flexible board (CN101)
5
two screws (PWH1.7
×
3.5)
BD board
(side B)
wire (flat type) (7 core)
Note: Set the wire (flat type) as illustrated,
then install the front panel section.
3
two screws
(K3
×
8)
2
lead wire
4
two screws
(BVTT3
×
5)
1
wire (flat type) (7 core)
(CN104)
5
front panel section