Filter
Top Products
882.01749.00 31 of 93
Chapter 3: Installation and Operation
3-1 Installation
Direction of Material Flow
Hopper Piece
Processing
Machine
Figure 4. Digital Dosing Feeder Assembly
1. The Digital Dosing additive feeder is not affected by machine vibration, so the best
performance is achieved by mounting the feeder directly on the feed throat of the
molding machine or extruder (see Figure 4). The inlet into the process machine must be
greater than 2” diameter, or an adapter may be necessary. If an adapter is required, it
must be designed so that there are no edges where material can hang up - it must be
smooth to promote consistent material flow.