Filter
Top Products
882.01749.00 7 of 93
1-2 General Safety Regulations
These regulations should be read, understood and periodically reviewed by all personnel
involved in any way with this machine.
Never operate or remove any machine components that are secured by wrench-type fasteners
unless the motor is electrically locked out and the disc is motionless.
Never operate the machine unless the dosing module is in place and all guards and covers are
in place and secure.
Prior to clearing a jam or performing any maintenance, the motor should be turned off and
electrically locked out. Be sure that the disc has stopped. Hands must not be inserted into the
machine to clear the jam.
Never extend fingers through safety guards.
Be sure that the v-belts are properly aligned and that tension is at its maximum.
Extreme care should be taken to see that all bolts are properly tightened at all times.
This machine is designed for the feeding of free-flowing granular materials. Do not feed any
other materials into the machine without consulting with one of our Application Engineers.
1-3 Responsibility
These machines are constructed for maximum operator safety when used under standard
operating conditions and when recommended instructions are followed in the maintenance
and operation of the machine.
All personnel engaged in the use of the machine should become familiar with its operation as
described in this manual.
Proper operation of the machine promotes safety for the operator and all workers in its
vicinity.
Becoming familiar with materials, inspection, speed limitations, screens, and guard
maintenance and total user responsibility will assist you in learning potential areas in need of
observation for danger.
Each individual must take responsibility for observing the prescribed safety rules as outlined.
All caution, warning and danger signs must be observed and obeyed. All actual or potential
danger areas must be reported to your immediate supervisor.