Filter
Top Products
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 49
STORAGE
Storage
Application: All Models.
Proper procedure for long term storage of the
SURFACE GRINDER will protect it against the
effects of corrosion and damage. If the SURFACE
GRINDER is not to be operated for a period of 30
days or more, proceed to store as follows:
1) Clean all accumulated foreign material from the
SURFACE GRINDER utilizing an appropriate
safety solvent.
CAUTION
Observe all applicable safety precautions for the
solvent.
2) Follow the procedure as outlined in the material
supplied by the engine manufacturer describing
long term storage for the engine.
3) Check all visible parts for wear, breakage or
damage. Order any part not required to make
the necessary repair. This will avoid a needless
delay when operating the SURFACE GRINDER
at next use.
4) Apply a dry film lubricant to all exposed metal
components to prevent the formation of rust.
5) Store the SURFACE GRINDER inside. If the
SURFACE GRINDER must be stored outside,
protect it with a suitable covering.