Filter
Top Products
EXPLANATION OF CODE IN REMARKS COLUMN
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 52
The following section explains the different
symbols and remarks used in the Parts section
of this manual. Use the help numbers found on
the back page of the manual if there are any
questions.
Sample Parts List:
NO PART NO PART NAME QTY. REMARKS
1 12345 BOLT ........................1 ...... INCLUDES ITEMS W/#
2# WASHER, 1/4 IN. ...... ....... NOT SOLD SEPARATELY
2# 12347 WASHER, 3/8 IN. .....1 ...... MQ-45T ONLY
3 12348 HOSE .....................A/R .... MAKE LOCALLY
4 12349 BEARING .................1 ...... S/N 2345B AND ABOVE
NO. Column
Unique Symbols - All items with same unique
symbol (∗, #,
+, %, or >) in the number column
belong to the same assembly or kit, which is
indicated by a note in the “Remarks” column.
Duplicate Item Numbers - Duplicate numbers
indicate multiple part numbers are in effect for the
same general item, such as different size saw blade
guards in use or a part that has been updated on
newer versions of the same machine.
PART NO. Column
Numbers Used -
Part numbers can be
indicated by a number, a blank entry, or
TBD.
TBD (To Be Determined) is generally used to show
a part that has not been assigned a formal part
number at time of publication.
A blank entry generally indicates that the item is not
sold separately or is not sold by Multiquip. Other
entries will be clarified in the “Remarks” Column.
QTY. Column
Numbers Used - Item quantity can be indicated by
a number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or
other parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not
sold separately. Other entries will be clarified in the
“Remarks” Column.
REMARKS Column
Some of the most common notes found in the
“Remarks” Column are listed below. Other additional
notes needed to describe the item can also be
shown.
Assembly/Kit - All items on the parts list with the
same unique symbol will be included when this item
is purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
Serial Number Break - Used to list an effective
serial number range where a particular part is used.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use - Indicates that the
part is used only with the specific model number or
model number variant listed. It can also be used to
show a part is NOT used on a specific model or
model number variant.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” - Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables,
shims, and certain washers and nuts.
“Not Sold Separately” - Indicates that an item
cannot be purchased as a separate item and is
either part of an assembly/kit that can be purchased,
or is not available for sale through Multiquip.
The contents and part numbers listed in
the parts section are subject to change
without notice. Multiquip does not
guarantee the availability of the parts
listed.
When ordering a part that
has more than one item
number listed, check the
remarks column for help in
determining the proper part
to order.