Filter
Top Products
Chapter 2: Server Installation
2-9
5. Installing add-on cards
If desired, you can install add-on cards to the system. See Chapter 5 for
details on installing PCI add-on cards.
6. Check all cable connections and airflow
Make sure all power and data cables are properly connected and not
blocking the chassis airflow. See Chapter 5 for details on cable connec-
tions. Also, check the air seals for damage. The air seals are located
under the blower fans and beneath the frame cross section that sepa-
rates the drive bay area from the serverboard area of the chassis.
Figure 2-5. Accessing the Inside of the System
(with optional front bezel shown)