System Sensor PDRP-1001 Stud Sensor User Manual


 
Optional Modules 2. Installation
PDRP-1001 Instruction Manual PN 50734:D0 04/06/01
27
LED Interface Module - 4XLM
Connect the terminals on TB1 of the LED Interface Module to the corresponding terminals of the RZA-
4X Remote Annunciator.
Make wiring connections with system power off.
Maximum wire impedance is 50 ohm per wiring connection.
The wiring of this module must follow the requirements as specified under "Power-limited Wiring
Requirements" on page 17.
Figure 18 Connection of 4XLM to RZA-4X
SYSTEM TROUBLE
RE-SOUND
TONE
SILENCE
FIRE ALARM ANNUNCIATOR
TB1
J2
Connect to corresponding
terminals of the RZA-4X
Remote Annunciator.
Front View
Side View
MS44--4xlmfconn.cdr
Single-gang
Box
+24V
Out #1
Out #2
Out #3
Out #4
Sysyem Trouble
Sound
Resound