Filter
Top Products
Infrared Gas Analyzer Appendix
Teledyne Analytical Instruments 111
Operating conditions: Ambient temperature: -5°C to 45°C
Ambient humidity: 90% RH max., non-
condensing
Storage Conditions: Ambient temperature: -20°C to 60°C
Ambient humidity: 100% RH max.,
non-condensing
Dimensions: Analyzer main unit: 177 x 483 x 600mm
Input/output module: 164 x 318 x 55mm
Weight: Approx. 22 kg (Analyzer only)
Internal Sample System
Wetted Parts: Gas inlet/outlet: SUS304
Sample cell: SUS304,chloroprene
rubber
IR window: CaF
2
O
2
sensor sample cell: SUS316
Internal piping: Toaron, Teflon
Gas Inlet/Outlet: Rc1/4 or NPT1/4 internal thread
Purge Gas Flowrate: 1L/min (when required)
A.2 Standard Functions
Output signal holding: Output signals are held during manual and
auto calibrations by activation of holding
(turning “ON” its setting).
The values to be held are the ones just
before start calibration mode or setting
value. Selectable.
Indication of instantaneous values will not
be held.
Remote output holding: Output signal is held at the latest value or
setting value by short-circuiting the
remote output holding input terminals.
Holding is maintained while the terminals