Filter
Top Products
Operation Model 7600
Teledyne Analytical Instruments 38
The user mode is where the operator configures the instrument and
sets up various parameters for the intended application. From the user
mode the following menus are available:
• Switch Ranges
• Calibration Parameters
• Alarm Setting
• Setting of Auto Calibration
• Setting of Auto Zero Calibration
• Setting of Peak Alarm
• Parameter Setting
Figure 3-3 shows the overall structure of the Model 7600 display
and menu hierarchy.
3.3 The Display Screen
3.3.1 Measurement Mode
The measurement mode screen is the default mode when the power is
turned on. It displays component and concentration information about the
process. The screen depends on the number of components. Figure 3-4 is an
example of a measurement mode screen for an instrument configured for
NO, SO
2
, CO
2
, CO and O
2
analysis with a 12 channel output.
Figure 3-4: Example Screen—5 Component Analysis 12 Channels