Chapter 7 Wireless LAN
P-870HN-51D User’s Guide
116
7.8 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Figure 55 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
Table 34 Wireless LAN > Advanced Setup
LABEL DESCRIPTION
802.11 Mode Select 802.11b Only to only allow IEEE 802.11b compliant WLAN
devices to associate with the P-870HN-51D.
Select 802.11g Only to allow IEEE 802.11g compliant WLAN devices to
associate with the P-870HN-51D. IEEE 802.11b compliant WLAN devices
can associate with the P-870HN-51D only when they use the short
premble type.
Select 802.11n Only to only allow IEEE 802.11n compliant WLAN
devices to associate with the P-870HN-51D. This can increase
transmission rates, although IEEE 802.11b or IEEE 802.11g clients will
not be able to connect to the P-870HN-51D.
Select 802.11b/g Mixed to allow either IEEE 802.11b or IEEE 802.11g
compliant WLAN devices to associate with the P-870HN-51D. The P-
870HN-51D adjusts the transmission rate automatically according to the
wireless standard supported by the wireless devices.
Select 802.11 b/g/n mixed mode to allow both IEEE802.11b,
IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with
the P-870HN-51D. The transmission rate of your P-870HN-51D might be
reduced.
RTS/CTS
Threshold
Enter a value between 0 and 2432.
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
