A SERVICE OF

logo

Appendix A Network Troubleshooting
P-870HN-51D User’s Guide
254
Note: Most operating systems ship with TCP/IP already installed and enabled. See
your Windows documentation for details on installing or configuring TCP/IP.
The Command Line Interface
To open the Windows command line interface:
1 Click Start > Run.
2 In the Run dialog box, enter cmd then click OK.
3 The Command Prompt window opens.
Command Syntax and Parameters
Command descriptions always indicate the default syntax you must use when
entering them on the command line. Some commands require additional
parameters in order to execute properly. Some may have optional parameters.
Parameters are displayed as follows: command [parameter]