Chapter 16 Remote Management
P-870HN-51D User’s Guide
192
Click Advanced > Remote MGMT to open the following screen. Use this screen
to configure your P-870HN-51D to be managed by an ACS.
Figure 96 TR-069
The following table describes the fields in this screen.
Table 71 TR-069
LABEL DESCRIPTION
Inform Select Enable to activate remote management via TR-069 on the
WAN. Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the P-870HN-51D sends
information to the auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-
configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-
configuration server.
WAN Interface
used by TR-069
client
Select a WAN interface through which the TR-069 traffic passes.
If you select Multi_WAN, you should also select the pre-configured
WAN connection(s).
Display SOAP
messages on
serial console
Select Enable to show the SOAP messages on the console.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection
request from the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the P-870HN-51D, this
user name is used to authenticate the ACS.
