Chapter 5 WAN Setup
P-870HN-51D User’s Guide
74
5.5.1 WAN Connection Configuration
Click the Edit or Add button in the WAN Service screen to configure a WAN
connection.
5.5.1.1 WAN Interface
This screen displays when you add a new WAN connection.
Figure 31 WAN Configuration: WAN Interface
Vlan8021p This indicates the 802.1P priority level assigned to traffic sent through
this connection. This displays N/A when there is no priority level
assigned.
VlanMuxId This indicates the VLAN ID number assigned to traffic sent through
this connection. This displays N/A when there is no VLAN ID number
assigned.
ConnId This shows the index number of each connection. This displays N/A
when the interface used by the connection is in Default Mode.
IGMP This shows whether IGMP (Internet Group Multicast Protocol) is
activated or not for this connection. IGMP is not available when the
connection uses the bridging service.
NAT This shows whether NAT is activated or not for this interface. NAT is
not available when the connection uses the bridging service.
Firewall This shows whether the firewall is activated or not for this connection.
The firewall is not available when the connection uses the bridging
service.
Modify Click the Edit icon to configure the WAN connection.
Click the Remove icon to delete the WAN connection.
Add Click Add to create a new connection.
Table 14 Internet Connection
LABEL DESCRIPTION
