Agilent Technologies 665xA Welding System User Manual


 
General Information 42
Table 1-7. Operator Replaceable Parts List (continued)
Description
(Unless otherwise specified, parts apply to all models.)
Agilent Part No.
Fuses, Series 664xA
M6A 250V (for 100 Vac line voltage, reference designator F450)
M5A 250V (for 120 Vac line voltage, reference designator F450)
M3A 250V (for 220/230/240 Vac line voltage, reference designator F450)
M15A 32V (for secondary rail bias, reference designator F402, F403)
M5A 125V (for ac bias, reference designator F600, F601)
M.125A 125V (for control circuits, reference designator F675, F700, 701)
Fuseholder for Line (Littelfuse 345 101; UL, CSA, SEMKO, VDE approved; 6.3/15A, 250V)
2110-0056
2110-0010
2110-0003
2110-0697
2110-0699
2110-0671
2110-0927
Line Fuses, Series 665xA
100 Vac line voltage, 15 AM
120 Vac line voltage, 12 AM
220/230/240 Vac line voltage, 7 AM
Line Fuses, Series 667xA *
*This is an internal fuse not replaceable by the operator.
Line Fuses, Series 668xA
16 AM for 360-440 Vac line (set of 3)
30 AM for 180-235 Vac line (set of 3)
Line Fuses, Series 669xA
20 AM for 360-440 Vac line (set of 3)
40 AM for 180-235 Vac line (set of 3)
2110-0054
2110-0249
21l0-06l4
5060-3512
5060-3513
5065-6935
5065-6934
Knob, rotary output control
Lockwasher, ac input safety cover (Series 667xA and 668xA)
Lockwasher, output bus bar, 1/4 spring (Series 667xA only)
Manual
Agilent 59510A/11 Relay Accessories
Series 603xA Operating
Series 664xA and 665xA Service
Series 664xA, 665xA, 667xA, 668xA, and 669xA Programming Guide
Series 667xA Service
0370-1091
2190-0484
3050-1690
5957-6382
5959-3301
5959-3376
5964-8269
5959-3384
Nut, output bus bar, hex 1/4-20x1/2 (Series 667xA)
Nut, power ground, hex w/lw 3/8x32 (Series 667xA)
Nut, power input cable (Series 668xA)
Nut, power input cable (Series 669xA)
Plug, analog connector
Plug, digital connector
2950-0084
0590-0305
0535-0082
0535-0038
1252-3698
1252-1488
Power cord assembly
Rack mount kit
Resistor, calibration
Screw, ac input safety cover, M4.0 x 60 mm long (Series 667xA, 668xA)
Screw, ac input safety cover, M4.0 x 60 mm long (Series 669xA)
Screw, carrying strap, M5x0.8x10 mm
Screw, dc output cover (Series 664xA and 665xA)
(See "Options" )
(See "Options")
(See Appendix A)
0515-0156
0515-0380
0515-1384
0515-1085
Screw, output bus bar
Series 665xA
Series 667xA, 1/4-20x1/2
Screw, outer cover, M5 x 0.8 mm
Screw, output sense terminal, M3x0.5x8mm (Series 667xA, 668xA, 669xA)
Slide mount kit
Standoff, GPIB
Terminal, crimp, ac power cord (Series 667xA only)
L or N terminal
Gnd terminal
0515-1085
2940-0103
0515-0073
0515-0104
( “See Accessories” )
0380-0643
0362-0681
0362-0207