Filter
Top Products
10
FibreSTORE RAID System: Rack Installation Guide
Preparing the Installation Site
The first step for installing any FibreSTORE RAID system in any rack is to select an
appropriate location for the rack. Use the information in Table 2 to prepare the site.
Ciprico Rack Disk
Enclosure
Controller
Enclosure
Cache Reten-
tion Unit
Dimensions 24" w x 77" h x 35"
d
(61 cm x 195.6 cm
x 88.9 cm)
17" w x 7" h x
24" d
(43.2 cm x
17.8 cm x 61
cm)
17.5" w x 3.5"
h x 24" d
(44.5 cm x 8.9
cm x 61 cm)
17.5" w x 3.5"
h x 18" d
(44.5 cm x 8.9
cm x 45.7 cm)
Weight Approximately
400 lbs (181.4 Kg)
empty; 1100 lbs
(499 Kg) fully
assembled
Approximately
80 lbs (37 Kg)
40 lbs (19 Kg)
with dual
controllers
65 lbs (30 Kg)
Power
Requirements
200 - 240 VAC,
50/60 Hz,
maximum 20
amps,
single phase
100 - 120 / 200
- 240 VAC, 50
/60 Hz, 6/3
amps
DC input from
FibreSTORE
disk enclosure,
maximum
60 watts
208 to 240
VAC, 6.5 amp
maximum
output
Operating
Temperature
5
°=to 40° C (41°=to 104° F) with 7,200 rpm drives
5
°=to 35° C (41°=to 95° F) with 10,000 rpm drives
Rack Plug Type Dual Power cords have 30A 250V plugs NEMA L6-30P
Cooling
Requirements
Approximately 10,000 BTU/hr fully assembled
Cable Entry Rear, at bottom of rack
Airflow Through front of disk enclosures and out the top and back of rack
Rear clearance 10 inches
Front clearance 6 inches
Top clearance 6 - 12"
Side clearances Ciprico rack has side doors - approximately 2 feet when fully open
Table 2. Rack and Components Information