Filter
Top Products
Chapter 2: Installing in a Ciprico Rack 23
Step 5. Putting on the Filler Panels
This step finishes off the front of the rack so that no openings show.
Put the panels in place as shown in Figure 16. Each panel has magnetic strips on the back
side so that they easily adhere to the rack.
1. Put horizontal panels wherever there is an open slot or half slot. There are two sizes of
horizontal panels: the half-high cover goes above the controller enclosure; the full-
size panel goes over any empty disk enclosure slot.
2. Put vertical panels over all of the rack channel mounts.
Figure 16. Putting on Filler Panels
2269
Horizontal half panel
Vertical half
panel
Vertical full
panel