Filter
Top Products
Chapter 3: Installing in a Generic Rack 27
Installing Slide Rails on a Disk Enclosure
1. Unpack the generic disk enclosure installation kit.
2. Slide the right and left intermediate slide rails forward until the back lock button mating
hole stops at the back lock button.
3. Slide both enclosure slide rails forward until the front lock buttons stop at the front lock
button mating holes. Push the front lock button to release the enclosure slide rail, and
remove both enclosure slide rails from the intermediate slide rails. See Figure 17.
Figure 17. Generic Disk Enclosure Installation Kit Slides
4. Push the back lock buttons and position the intermediate slide rails back in the center
of both stationary flange mounts.
2601
Intermediate
Slide Rail
Enclosure
Slide Rail
Stationary Flange Mount
Back Lock Button
Back Side of Front
Lock Button
Mating Hole for
Front Lock Button