Filter
Top Products
Chapter 2: Installing in a Ciprico Rack 19
3. Using caution, push in the tabs for the lock buttons located on each slide rail that is
mounted on the disk enclosure (Figure 13), and slide the enclosure in until the lock
buttons fit securely into the mating holes in the flange mount. You should hear a click
when the lock buttons slide into the mating holes.
Figure 13. Adjusting Lock Buttons on Slide
4. Open the side doors and push the lock buttons. Slide enclosure into position
5. Repeat steps 1 - 4 for each enclosure.
WARNING Be very careful not to pinch fingers when completing this step.
2247
Tab for Lock Button
Enclosure
Slide Rail
mounted on
Disk Enclosure
Stationary
Flange Mount
Stationary
Flange Mount
Front Mounting
Screws
Front Channel
Mount