Filter
Top Products
Chapter 2: Installing in a Ciprico Rack 13
Step 1. Preparing the Rack
Ciprico ships racks with slide rails already installed in the rack.
1. Remove packaging from the rack.
2. Roll the rack to the place of operation.
Make sure there is ample space in back of the rack to fully open the rack door
(approximately 3 feet) for installation and cabling. Make sure you have enough
room in front of the rack (approximately 3 feet) to install disk enclosures.
You can access the components in the rack from the side by opening the doors on
both sides of the rack.