Filter
Top Products
12 FibreSTORE RAID System: Rack Installation Guide
Overview
This chapter provides instructions for installing disk enclosures, controller enclosures, and
cache retention units (CRUs) in a Ciprico FibreSTORE RAID rack.
If you purchased your rack from a company other than Ciprico, see Chapter 3, Installing in
a Generic Rack.
After reading the safety issues and preparing the installation site (see Chapter 1), complete
the following steps to install the FibreSTORE RAID systems in a Ciprico rack:
1. Prepare the rack.
2. Install the CRUs.
3. Install the disk enclosures.
4. Install the controller enclosures.
5. Mount the filler panels.
Install all components as specified in Supported Rack Configurations:
Configuration for One RAID System (AAMK36A) on page 6;
Configuration for Two RAID Systems (AAMK36A2) on page 7;
Configuration for Three RAID Systems (AAMK36A3) on page 7;
Configuration for Four RAID Systems (AAMK36A4) on page 8