Filter
Top Products
Chapter 3: Installing in a Generic Rack 33
Step 4. Installing the Controller Enclosure
You can order an install kit for the controller enclosure. The install kit includes the parts
and instructions necessary to install a controller enclosure.
Install the controller enclosure from the front of the rack.
Attaching Mounting and Support Brackets
1. Attach the mounting brackets on both right and left sides of the controller enclosure
with three counter-sunk 1/4" #6-32 Phillips flathead screws on each side, as shown in
Figure 23.
Figure 23. Attaching Mounting Brackets
Right Side of
Enclosure
Mounting
Bracket
2441
Front
1/4” #6-32 Black
Screws - 3 per side