Filter
Top Products
20
4. Turn off the water pump.
Brake
The brake (optional item) stops the saw from moving
forward or backward unintentionally. DO NOT assume at
any time the transmission will act as a brake when at
Neutral. Note: On extreme slopes chock the tires to
prevent unnecessary saw movement.
1. Push the brake pedal down and pivot it into the left
brake groove (on the frame) to engage the brake.
2. Push the brake pedal down and pivot it into the right
brake groove (on the frame) to disengage the brake.
Weight Bars
The weight bars provide additional weight to the front of
the saw to improve overall performance. The combined
weight is approximately 26 lb.
Figure 24: Weights
1. Secure the weight bars to the front of the frame
base.
2. Remove the screws to remove the weight bars.