Filter
Top Products
CALIBRATION
9 - 8
ETC00781(4) Series 100 e 02/2004
If the correct user code has not yet been entered,
the displays show
Use the keys to select the correct user - code
and enter using
It appears
You can enter a time interval (hours), when an automatic zeroing has to be performed.
Point of reference is the current time.
Range of accepted entries: 0 - 999 (hours)
Note !
If the entry is “0” (zero), the time - controlled calibration is deactivated.
Entry is performed using
followed by
After entry of interval, zeroing will be done automatically at the end of the entered time interval.
AUTOMATIC ZEROING (OPTION)