Filter
Top Products
SERIAL INTERFACE (OPTION)
12 - 9
ETC00781(1) Series 100 e 10/2001
Rosemount Analytical
12.4.5 Status Telegram
If telegram syntax is faulty, or analyzer is unable to act upon an instruction received, then the
analyzer will transmit a status telegram to the host computer.
These status telegrams are listed here for reference:
$ID;000;S100;LPB<CR> unrecognized instruction code
$ID;000;S101;LPB<CR> LP byte in error
$ID;000;S102;LPB<CR> start character missing
$ID;000;S103;LPB<CR> input buffer overflow
$ID;xxx;S104;LPB<CR> analyzer offline status
$ID;xxx;S105;LPB<CR> text line too long
$ID;xxx;S106;LPB<CR> undefined instruction
$ID;xxx;S107;LPB<CR> invalid integer value
$ID;xxx;S108;LPB<CR> numerical value outside defined range
$ID;xxx;S109;LPB<CR> invalid failure/status code
$ID;xxx;S110;LPB<CR> instruction can not be done here
$ID;xxx;S111;LPB<CR> failure in transmitted character
$ID;xxx;S112;LPB<CR> zeroing running
$ID;xxx;S113;LPB<CR> spanning running
$ID;xxx;S114;LPB<CR> invalid real number
$ID;xxx;S115;LPB<CR> automatic calibration mode off
$ID;xxx;S116;LPB<CR> parameter outside defined range
$ID;xxx;S117;LPB<CR> preflushing period is running
xxx: instruction code
ID: device ID no. in RS 485 mode
LPB: message length parity byte
<CR>: terminate character
STATUS TELEGRAM