Filter
Top Products
HOUSING
23 - 1
ETC00781(4) Series 100 e 02/2004
23. Housing
23.1 Cleaning of Housing Surface
For cleaning the analyzer housing surface use a soft, fluff free cloth and all purpose detergent.
P Disconnect all voltage supplies.
To avoid risks by explosive, toxic or unhealthy gas components,
first purge the gas lines with ambient air or nitrogen (N
2
) before
cleaning or replacing parts of the gas paths.
If it is necessary to disconnect the gas connections, the gas line fittings of the
analyzer have to be closed with PVC-caps before cleaning to avoid pollution!
P Moisten the soft, fluff free cloth with the cleaning solution
(mixture of 3 parts water, 1 part all purpose detergent max.).
Be sure to use a moisted, but not wet cloth only !
Be sure, that no liquid can drop into the housing inside !
P Clean the analyzer housing surface with the damped cloth.
P If required, rub off the housing, but not the front panel, with a dry cloth afterwards.
CLEANING OF HOUSING SURFACE