Filter
Top Products
7 - 1
KEY FUNCTIONS
ETC00781(4) Series 100 e 02/2004
7. Key Functions
By default the analyzer is operated and programmed by using the membrane keypad with its
four keys (see Fig. 1-1 and 1-2, Item 4 to 7).
If either the BINOS100
®
2M or BINOS 100 F analyzer is equipped with an internal pump, the
fifth key “PUMP” is activated by software. (see Fig. 1-2. Item 8 and chapter 7.4).
BINOS
®
100 F for use in rough surroundings may optionally be equipped with a touch screen
keypad without fifth key for gas sampling pump. In this case the pump is controlled via software
menu.
Operator guidance prompts will appear on the 4 digit LED displays.
Battery buffering of the stored parameters prevents their loss in the absense of voltage supply.